Transform Your Cabinets with Benjamin Moore’s Best Cabinet Paint: A Story of Success [Expert Tips and Stats Included]

Short answer: Benjamin Moore’s Advance line is considered the best cabinet paint for its durability and smooth finish.

Step-by-Step Guide to Achieving a Professional Finish with Benjamin Moore’s Best Cabinet Paint

Have you ever dreamt of having a kitchen like those seen on HGTV shows? One that looks so sleek and sophisticated, you’d think it came straight out of a magazine shoot? If so, then Benjamin Moore’s best cabinet paint is the product to make your wishes come true. In this step-by-step guide, we aim to help you achieve that professional finish by using Benjamin Moore’s top-quality products.

Step One: Preparation
The first and most important part of any painting job is preparation. This includes cleaning your cabinets with TSP (trisodium phosphate) or another grease-fighting cleaner to remove dirt and grime from the surfaces. It’s essential to sand down any glossy areas or scratches in the wood with 120-grit sandpaper before priming.

Step Two: Labeling
Label each door and drawer front as you take them down so you can put them back in their original position later. This step saves time during reinstallation, highlighting which cabinet components require more attention than others.

Step Three: Sanding & Priming
Next up, sand all surfaces lightly with 220-grit sandpaper before proceeding with priming. Ensure that all dust particles are immediately cleaned up following this step.

Start by painting the backs of your cabinets before moving onto the fronts. You can do this using either a brush or roller depending on preference. To ensure even coverage, apply one coat of primer and wait until it dries before applying a second coat for added durability.

Step Four: Paint Selection
It’s worth mentioning that when selecting a paint color option for your cabinets, it’s vital to opt for one that complements other colors in the room e.g., flooring finishes etc

Choose between an oil-based enamel such as Satin Impervo® Alkyd Low Lustre Enamel or acrylic urethane such as Advance® Waterborne Interior Alkyd Paint; these options available from Benjamin Moore®.

Step Five: Painting
Start with the cabinet frames and progress to the door/drawer fronts. Like the primer, apply two coats of paint for guaranteed coverage and wait until it dries thoroughly between coats. Accurate application is critical at this point; be sure not to over-apply or leave brush strokes.

Step Six: Reassembling
After painting all components accurately, proceed by reattaching handles, hinges, and knobs carefully. Connect each similar piece meticulously to avoid any confusion during the process.

The end result? A professional-looking kitchen that could match any seen on HGTV or magazines. In conclusion, Benjamin Moore’s best cabinet paint guarantees a flawless finish if done correctly through following these step-by-step guidelines.
So, why wait? Get painting!

Frequently Asked Questions About Benjamin Moore’s Best Cabinet Paint and Their Answers

Are you on the hunt for the best paint for your kitchen cabinets? Look no further than Benjamin Moore. Not sure where to start or have some questions about their cabinet paint? We’ve got you covered.

Q: Does Benjamin Moore have a specific paint line for cabinets?

A: Yes! They offer Cabinet Coat, which is specifically formulated for painting cabinetry and has excellent adhesion and durability. This product can be used on all types of wood, laminate, or melamine surfaces, giving each project a professional, flawless finish.

Q: What is the difference between Cabinet Coat and regular wall paint?

A: The biggest difference is that Cabinet Coat is more durable and offers better coverage compared to traditional wall paints. It also tends to dry faster and provides better adhesion without sanding.

Q: Do I need to primer my cabinets before applying Cabinet Coat?

A: If you are painting over a surface that was previously painted with oil-based paint or has stains/wood knots, it’s recommended to use an oil-base primer. However, if your cabinets are in good condition and have no previous coatings, you can use Cabinet Coat as both a primer and topcoat in one.

Q: How many coats should I apply?

A: This depends on the color of your existing cabinetry versus what color you’re changing them to. In most cases, 2-3 coats of Cabinet Coat will be sufficient for complete coverage.

Q: Will I need special tools like spray guns or air compressors to apply Cabinet Coat?

A: You do not need special equipment unless you are choosing to use those methods. Most people find that using quality brushes or a roller gives optimal results.

Q: Is there any prep work involved before painting my cabinets with Cabinet Coat?

A: Yes! Just like anything else worth doing in life, prep work is key here. After making any necessary repairs prior cleaning by removing dust and grease using TSP labeled detergent.

Q: Can I use Cabinet Coat on my bathroom cabinets?

A: Yes! The durable formula for Benjamin Moore’s Cabinet Coat can be used to paint not just your kitchen cabinets but also any other cabinetry in your home such as those in the bathroom or vanity area.

In conclusion, Benjamin Moore’s Cabinet Coat is a top-performing paint line that is perfect for painting all types of cabinetry. Whether you’re revamping your kitchen or looking for a way to spruce up an old vanity, their durable and long-lasting formula will give you professional-looking results every time. By following these frequently asked questions about using Cabinet Coat, you’ll be well on your way to achieving a high-quality finish that will last for years to come.

Top 5 Benefits of Choosing Benjamin Moore as Your Go-To Cabinet Paint Brand

When it comes to painting your kitchen cabinets, the quality of the paint you choose is just as important as the color itself. After all, cabinets are a high traffic area that gets exposed to heat, moisture and constant use on a daily basis. That’s why choosing a trusted brand like Benjamin Moore is crucial.

Here are the top 5 benefits of choosing Benjamin Moore as your go-to cabinet paint brand:

1. Superior Quality and Durability

One of the main advantages of choosing Benjamin Moore is their commitment to creating high-quality paints that can withstand wear and tear over time. Cabinets painted with Benjamin Moore paints have been known to last for years without peeling or fading due to its advanced bonding properties.

2. Wide Range of Colors

Benjamin Moore’s extensive line-up of colors makes it easy for you to find the perfect shade to match your existing decor or create an entirely new look in your kitchen space. Their Color Care System makes their selection process much smoother by offering color swatches, sample sizes, and complimentary design advice.

3. Eco-Friendly Options

If you’re environmentally conscious, you’ll love that Benjamin Moore carries several types of eco-friendly paints made from low-volatile organic compounds (VOCs). This means they’re odor-free, have minimal impact on air quality in the home and reduce potential health issues such as headaches or nausea caused by traditional solvent-based paints.

4. Excellent Finish Options

Benjamin Moore offers many different finishes for cabinets: matte, eggshell, satin, semi-gloss or glossy finish depending on what your preference is — giving you more flexibility in style choices while still maintaining an overall professional looking outcome.

5. Trusted Brand Reputation

For over a century, Benjamin Moore has been known for producing high-quality paints consistently through innovation and dedication to customer satisfaction which has helped establish its reputation as one of America’s most trusted brands overall- even beyond cabinet painting use cases!

In summary, choosing Benjamin Moore as your cabinet paint brand of choice guarantees superior quality, a wide range of colors, eco-friendly options, excellent finish options and a trusted brand reputation that your cabinets deserve. So why not make the investment this season at your nearest home improvement store!

Expert Tips on Choosing the Right Sheen for Your Cabinets with Benjamin Moore

Choosing the right sheen for your cabinets is a crucial step in achieving the perfect look for your kitchen, bathroom or any other room in your home where you have installed custom cabinetry. The finish of the surface of your cabinetry not only affects its visual appeal but also its durability and ease of cleaning.

Fortunately, with Benjamin Moore’s wide range of finishes available, choosing the ideal sheen for your cabinets has become relatively more accessible than ever before. Here are some expert tips that will help you choose the right sheen for your cabinets with Benjamin Moore.

Consider the Traffic Your Cabinets Will Experience

One vital factor to consider when selecting a sheen level is how much traffic your cabinets get daily. It would be best if you chose high sheens like satin or semi-gloss so that they can withstand frequent touches and scuffs from daily use without leaving damages on their surfaces.

Choose Sheens That Suit Your Style

The style and feel you want to achieve in a particular room play an important role in determining which sheen to choose for your cabinet. If you desire a traditional look, then consider going for classic finishes such as eggshell or matte. However, if you prefer modern vibes, then shiny finishes like high-gloss would be ideal.

The Lighting Factor

Lighting has a significant impact on the appearance of different sheens, especially glossy ones. If considering glossy finishes like lacquer or high gloss in spaces with minimal lighting conditions, ensure to incorporate accent lighting to enhance their beauty as well as showcase their full potential.

Understand Each Sheen Level’s Properties

Lastly, it’s essential that before making any final decision on sheen level selection; you should understand each variety’s properties thoroughly. For instance, while lower-sheen options typically shield stains better, higher-sheen levels are easier to clean since they allow most grease and filth to wipe off quickly without leaving residue.

In conclusion:

Choosing the right sheen level for your cabinets can be challenging, but with Benjamin Moore’s comprehensive range of finishes and the expert guidance outlined above, it should be a walk in the park. If you are still confused about what sheen will be best for your custom cabinetry needs, stop by any Benjamin Moore dealer or reach out to them online to get personalized advice based on specific circumstances and desires. Remember, the right sheen not only enhances your cabinetry’s aesthetic appeal but also adds functionality and durability.

Comparing Benjamin Moore’s Best Cabinet Paint to Other Brands: Which is Right for You?

If you’re in the market for a high-quality cabinet paint, chances are you’ve heard of Benjamin Moore. This popular brand is known for their exceptional durability, beautiful finishes, and vast selection of colors. But before you commit to Benjamin Moore’s best cabinet paint, it’s important to compare it to other options on the market. Here’s what you need to know.

First up: Sherwin Williams’ ProClassic Interior Waterbased Acrylic-Alkyd Enamel. Like Benjamin Moore, Sherwin Williams’ ProClassic paint offers a smooth finish and excellent durability. However, while both brands are water-based and low-VOC (meaning they emit fewer harmful chemicals), Sherwin Williams actually contains alkyd resin as well, which gives it even greater durability than Ben Moore. So if you’re looking for the toughest possible surface on your cabinets, go with Sherwin Williams.

Next is Valspar Cabinet Enamel Semi-Gloss Base 1 Paint. If you’re searching for a budget-friendly option that still delivers quality results, Valspar may be the way to go. While it may not be quite as durable or easy to apply as Ben Moore or Sherwin Williams, it still offers plenty of benefits without breaking the bank.

Then there’s Behr Premium Interior Cabinet & Trim Enamel Paint. Many homeowners love this Behr product because it dries quickly and resists scuffing and fading over time—plus it has great adhesion even without sanding or priming first! However, its color selection is somewhat limited compared to some other big-name brands like Benjamin Moore.

Speaking of Ben Moore…what sets this company’s best cabinet paint apart from the rest? In terms of finish quality and color options alone, there are plenty of good reasons why many professional painters swear by Benjamin Moore products (in fact, many claim that their paints go on smoother and more evenly than competitors’). However, perhaps the most compelling reason to choose Ben Moore is their commitment to sustainability and eco-friendliness.

Benjamin Moore’s cabinet paints are all low-VOC, meaning they emit fewer harmful chemicals into the air than other brands. Additionally, their environmentally friendly manufacturing processes help reduce waste and conserve resources. If you’re someone who wants to make an eco-conscious decision, or if you simply want a beautiful finish that won’t harm your health or the environment around you, Benjamin Moore paint may be the way to go.

Ultimately, choosing the right cabinet paint for your home comes down to your personal preferences and priorities. Whether you prioritize durability, affordability, aesthetics, or sustainability (or some combination of these factors), there’s likely a product out there that will fit your needs perfectly. By comparing Benjamin Moore’s best cabinet paint with other top brands on the market today, you’ll be able to make a smart and informed choice for your home improvement project.

Before and After Photos: How Using Benjamin Moore’s Best Cabinet Paint Can Completely Transform Your Kitchen.

If you are browsing through your Pinterest or Instagram accounts for kitchen renovation inspiration, you have probably come across countless “before and after” photos of painted kitchen cabinets. And you might be wondering how an application of paint can make that much of a difference.

Well, the truth is: it’s all in the Benjamin Moore paint.

Benjamin Moore is a leader in the world of creative colour solutions. Their decades-long focus has been on providing premium quality products that deliver outstanding performance and provide exceptional value. One innovation from their product catalogue which has garnered particular attention is their cabinet paint line-up.

This amazing product range from Benjamin Moore boasts superior adhesion, exceptional durability, speedy drying time and beautiful finishes which makes it a perfect match for cabinet painting projects. This means that homeowners don’t need to spend excessive amounts on new cabinet installations – simply give them a refreshing coat of Benjamin Moore cabinet paint!

Using professional painters who engage in excellent craftsmanship can also have fantastic results when coupled with this superior product range to produce high-quality painted cabinets making them look as good as newly installed cabinetry at only 1/4th or 1/5th the cost!. As part of the overall kitchen reno process, repainting cabinets is quick since it doesn’t involve extensive prep work like staining requires which often results in prompt turnaround times meaning less disruption during your busy household schedules and more savings compared to other methods.

One great advantage for using Benjamin Moore’s cabinet paints lies in its custom color selection feature. You can request any color mix you desire from their wide range of colors which include over 3,500 shades – with custom mixes available too! From crisp whites, rich blues to warm greys among others and they even assist customers with having special requests addressed every step of the way, making sure they achieve the result everyone desires!.

Finally, there’s no doubt that opting for Benjamin Moore’s best quality cabinet paints will prove to be an excellent investment over the long term. The cabinets will stay looking good for an extended period, even with rigorous wear and tear because of daily use- don’t be shocked by the longevity! Coupled with its quick setup time and affordable cost, this cabinet paint is a win-win. More savings = more happy homeowners!.

The before and after photos might appear too incredible to be true, but it genuinely all lies in using Benjamin Moore’s premium quality cabinet paint. With their superior adhesion, durability, speedy drying time and beautiful finishes which are customizable rich color selection makes them stand out amongst other paints available on the market today. So why not consider giving your cocina a fresh look using Benjamin Moore’s best cabinet paint instead of spending 4 or 5 times as much with new cabinetry? It sure is worth it!

Table with useful data:

Product Name	Sheen	Recommended Usage	Price	Rating
Advance Satin Cabinet Paint	Satin	For Cabinets and Trim	$70.99/gallon	4.7/5
Advance Semi-Gloss Cabinet Paint	Semi-Gloss	For Cabinets and Trim	$74.99/gallon	4.8/5
Scuff-X Matte Cabinet Paint	Matte	For High-Traffic Areas	$80.99/gallon	4.6/5
Benjamin Moore Fresh Start Premium Interior Primer	N/A	For All Interior Surfaces	$44.99/gallon	4.9/5

Information from an expert

As a professional painter, I highly recommend Benjamin Moore cabinet paint for its exceptional quality and durability. It dries quickly to a hard, smooth finish that resists fading, chipping, and peeling. With its advanced formula, this paint can withstand frequent cleaning without losing its vibrant color. Plus, Benjamin Moore offers a wide range of colors to choose from, so you can easily find the perfect shade for your cabinets. Overall, I believe Benjamin Moore is the best cabinet paint on the market and will give you the long-lasting results you’re looking for.

Historical fact:

Benjamin Moore has been manufacturing paint since 1883 and is considered a leading brand in the industry, with their best cabinet paint being a popular choice for homeowners and professionals alike for many years.